*No Sales Tax and *Free Shipping!
*No Sales Tax and *Free Shipping!
Skip to content

Body Armor 4x4 Warranty & FAQ

BODY ARMOR LIMITED LIFETIME WARRANTY

Body Armor 4x4 (BA) warrants to the original purchaser that these products will be free from defects in material and workmanship prior to shipping and/or installation for the life of the product. This non-transferable limited lifetime warranty does not cover damage or impairment in any part due to misuse, commercial, industrial, or rental use, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose.

BA products are built and sold for highway and off-road use. The original purchaser assumes all risks as to the selection, suitability and performance of all goods and products purchased. BA's sole and exclusive obligation under this warranty shall be to repair or replace the item(s) and their discretion and BA will not issue any credit or refund to the consumer. BA does not offer reimbursement for any vehicle or consequential damage repair. Proof of purchase is required on all warranty claims. BA may require pictures to diagnose the warranty claim and may require the product(s) be returned if determined by BA to be necessary. If a return is required then a RGA number will be issued by BA. Any item arriving to BA without a valid RGA number will be refused and sent back. Upon evaluating the RGA and no valid warranty claim is made, the RGA will be returned to the consumer at their expense or disposed by BA after 60 days. BA will not be responsible for incidental charges such as removal, installation, shipping costs or lost during transit. Any items that are ordered in error, refused or cancelled are not considered a valid warranty claim and cannot be returned to BA.

Body Armor 4x4 (BA) warrants to the original purchaser that these products will be free from defects in material and workmanship prior to shipping and/or installation for the life of the product. This non-transferable limited lifetime warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose.


BA products are built and sold for highway and off-road use. The original purchaser assumes all risks as to the selection, suitability and performance of all goods and products purchased. BA's sole and exclusive obligation under this warranty shall be to repair or replace the item(s) and their discretion and BA will not issue any credit or refund to the consumer. Proof of purchase is required on all warranty claims. BA may require pictures to diagnose the warranty claim and may require the product(s) be returned if determined by BA to be necessary. If a return is required then a RGA number will be issued by BA. Any item arriving to BA without a valid RGA number will be refused and sent back. Upon evaluating the RGA and no valid warranty claim is made, the RGA will be returned to the consumer at their expense or disposed by BA after 60 days. BA will not be responsible for incidental charges such as removal, installation, shipping costs or lost during transit. Any items that are ordered in error, refused or cancelled are not considered a valid warranty claim and cannot be returned to BA.

Warranty Process:

 

• Contact an authorized BA dealer to initiate warranty process. Authorized dealers must contact BA to assist in evaluating the warranty claims. Valid warranties will have a RGA issued. Once issued the dealer will request the product be returned to BA facilities.
• Products purchased through an authorized BA dealer will be refunded and/or credited by that BA dealer.
• Warranty contact: orders@bodyarmor4x4.com
• Return address: Body Armor 4x4, 1050 N. Vineyard Ave. Ontario CA, 91764, P: 951-808-0750

CLEARANCE ITEMS

All clearance items are sold at highly discounted rates due to the fact that they are no longer in production. Due to the highly discounted prices, there are no returns accepted on these parts under any circumstances. Due to the highly discounted prices there will be no finish or structural warranty offered on any clearance items. 

FINISH WARRANTY


The finish is warranted to be free of defects for a period of 3 years from date of purchase. Product(s) that have been abused, altered, incorrectly installed or used in competition are void of said warranty. Surface rust, pitting or discoloration is a direct result of improper maintenance is not covered by this warranty. It is the responsibility of the owner to preserve and maintain the finish of their product(s). In areas where high concentrations of road salts and other corrosive agents are used, rust or damage to the finish may occur if BA product(s) are not properly maintained. Lack of proper maintenance in these areas may void the finish warranty. See below for routine maintenance tips and recommendations.

 

PRODUCT CARE AND MAINTENANCE

 

• Textured coat finished should be cleaned ONLY with a mild soap on a damp sponge.
• BA recommends wiping down the product with a light coat of lubricate (i.e. WD40) periodically to maintain its luster.
 DO NOT apply polish or wax that requires buffing for removal as this may damage the finish.
 DO NOT coat the product with any type of shine such as Tire Shire or glossy aerosol or gel. This can cause discoloration, staining or bubbling.

BODY ARMOR 4X4 SKY RIDGE SERIES LIMITED WARRANTY

Body Armor 4x4 (BA) warrants to the original purchaser that its Sky Ridge Series products are free from defects in workmanship and materials under normal and intended use for 2 years. This warranty extends only to Sky Ridge Tents, Sky Ridge Annex Rooms and Sky Ridge Awnings. All other Body Armor 4x4 products are subject to Body Armor 4x4’s limited lifetime warranty.

Body Armor 4x4 shall not be responsible for the common materials that wear inevitably with extended use (e.g., Ultra Violet (UV) light damage on tents, exhausted zippers, aesthetic surface oxidization), or defects caused by accident, abuse, alteration, storm damage, extreme or abnormal weather conditions, mold and mildew, misuse or improper care.

THERE ARE NO OTHER EXPRESS WARRANTIES BEYOND THE TERMS OF THIS LIMITED WARRANTY. IN NO EVENT SHALL BODY ARMOR 4X4 BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

To assure product quality, Body Armor 4x4 reserves the right to change product design, material, specification and finishes without prior notice to customers. This limited warranty gives you specific legal rights and you may also have other rights, which may vary from state to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Also, some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

Body Armor 4x4 reserves the right to discontinue product lines and substitute products or provide other remedies than those listed in this limited warranty for those discontinued products.

If after inspection we find that a product failed due to a manufacturing or material defect, we will repair or replace the product, at
our option, without charge.

WARRANTY PROCESS

Contact an authorized Body Armor 4x4 dealer to initiate warranty process. Authorized dealers must contact BA to assist in evaluating the warranty claims. Valid warranties will have an RGA issued. Once issued the dealer will request the product be
returned to Body Armor 4x4 facilities. Products purchased through an authorized Body Armor 4x4 dealer will be refunded and/or
credited by that Body Armor 4x4 dealer.

CARE AND MAINTENANCE

• Proper storage will extend the life of your tent, annex or awning. Be sure it is fully dry prior to storage and keep in a cool, dry location free from sunlight.

• Dry your products thoroughly before closing them. We recommend you air dry it in between adventures to prevent mildew and mold growth. These can lead to discoloration, foul odor and your tent material to degrade. Mold and mildew are not covered under warranty.

• Periodically lubricate zipper teeth with non-scented bees wax. Make sure to keep them free from dust and dirt. This will prolong the life of your zippers.

• Ladder should be wiped free of any dust or dirt prior to collapse. Periodically spray the side rails with any silicone spray. Do not spray the ladder tread which can lead to slipping.

• To clean your mattress cover, remove cover and machine wash using gentle cycle with delicate washing detergent. Hang dry only! DO NOT tumble dry.

• To clean your fabric, use a mild detergent and warm water gently applied with a sponge. Rinse with a clean wet sponge and allow to completely air dry before storing.

 

CARE AND MAINTENANCE CONTINUED

• Avoid excess sun exposure to prolong the life of your product. UV rays can degrade fabrics and water proof

• Coatings. If your product begins to break down, we suggest washing the fabric with a mild detergent and water solution followed by a treatment of a water repellent designed for tents. Consult your local outdoor retailer for other tent fabric care products and use as directed.

 

Instruction Manuals